Cooling
This mode is used to cool and dehumidify the air.
1. Push the
button to the off position.
2. Turn the air flow control dial to the MAX A/C
or
position.
3. Turn the fan control dial to the desired position.
4. Push the button. The indicator light comes on.
5. Turn the temperature control dial to the desired position.
● For quick cooling when the outside temperature
is high, push the
button to
the on position (indicator light on). Be sure
to return the
button to the off position
for normal cooling. MAX A/C may be used
for quick cooling.
See also:
Tilt operation
Pull the lever 1 all the way toward you and
adjust the steering wheel up or down 2 to the
desired position. Lock the wheel by releasing the
lever and ensure that the lever has returned to its
or ...
Emergency engine shut off
To shut off the engine in an emergency situation
while driving perform the following procedure:
– Rapidly push the push-button ignition switch 3
consecutive times, or
– Push and hold the push- ...
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
