Automatic door locks

- All doors lock automatically when the vehicle speed reaches 15 MPH (24 km/h).

- All doors unlock automatically when the ignition switch is placed in the OFF position.

The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure:

1. Close all doors.

2. Place the ignition switch in the ON position.

3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to the 5 position (UNLOCK) for more than 5 seconds.

4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.

5. The ignition switch must be placed in the OFF and ON position again between each setting change.

When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).

    See also:

    Warning signals
    To help prevent the vehicle from moving unexpectedly by erroneous operation of the Intelligent Key or to help prevent the vehicle from being stolen, a chime or buzzer sounds from inside and ou ...

    After the operation
    1. Lower the vehicle carefully to the ground. 2. Dispose of waste oil and filter properly. - Prolonged and repeated contact with used engine oil may cause skin cancer. - Try to avoid direct ...

    Removing the bolt-on wheel cover (if so equipped)
    CAUTION Do not use your hands to pry off wheel caps or wheel covers. Doing so could result in personal injury. The wheel covers are held on by the wheel nuts. The wheel cover will be removed al ...