Locking doors

1. Remove the key from the ignition switch.

2. Close all the doors.

3. Push the LOCK keyfob. button 1 on the keyfob.

4. All the doors will lock.

All of the doors will lock when the LOCK remains open. button is pushed even though a door remains open.

5. The hazard indicator flashes twice and the horn chirps once.

- When the with LOCK button is pushed with all doors locked, the hazard indicator flashes twice and the horn chirps once as a reminder that the doors are already locked.

- Operate the door handles to confirm that the doors have been securely locked.

    See also:

    Driving on snow or ice
    WARNING ● Wet ice (32°F, 0°C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or “grip” under these condition ...

    Hood
    (1) Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly.  (2)- Push the lever at the front of the hood to the side as illu ...

    Loading tips
    - The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./ C.M.V.S.S. certification label. - Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. - ...