Parking brake

- Be sure the parking brake is fully

- Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident.

- Do not release the parking brake from outside the vehicle.

- Do not use the gear shift in place of the parking brake. When parking, be sure the parking brake is fully engaged.

- Do not leave children unattended in a vehicle. They could release the parking brake and cause an accident.

To apply: Fully depress the parking brake pedal 1 .

To apply: Fully depress the parking brake pedal 1 .

To release:
1. Firmly apply the foot brake 2 .

2. Depress the parking brake pedal 1 and the parking brake will be released.

3. Before driving, be sure the brake warning light goes out.

    See also:

    Brake fluid
    For further brake fluid specification information, refer to Capacities and recommended fuel/lubricants in the Technical and consumer information section of this manual. WARNING: - Use only new ...

    Sunglasses holder
    To open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAUTION ● ...

    Vehicle set-up
    1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn the engine off and wait more than 10 min ...