Flat tire
See also:
Installing front license plate
Use the following steps to mount the front license
plate:
(1) Make holes on the plastic finisher at the
location mark (small dimple) using a 0.31 in
(8 mm) drill. Apply light pressure to the ...
Tilting the moonroof
Close the moonroof by pushing the switch
toward 2 . Release the switch,
then push
the switch toward 2 again to tilt
the
moonroof up.
To tilt the moonroof down, push the switch
toward 1 .
...
Standard Mode command list
Category Command:
Phone Command:
Navigation Command:
Information Command:
Audio Command:
...