All-Wheel Drive (AWD) models

- Always use tires of the same type, size, brand, construction (bias, biasbelted or radial), and tread pattern on all four wheels. Failure to do so may result in a circumference difference between tires on the front and rear axles which will cause excessive tire wear and may damage the transmission, transfer case and differential gears.
- ONLY use spare tires specified for the AWD model.
If excessive tire wear is found, it is recommended that all four tires be replaced with tires of the same size, brand, construction and tread pattern. The tire pressure and wheel alignment should also be checked and corrected as necessary. Contact a NISSAN dealer.
See also:
Drive belt
1. Power steering fluid pump.
2. Generator.
3. Air conditioner compressor.
4. Crankshaft pulley.
WARNING:
Be sure the ignition switch is in the OFF or
LOCK position before servicing drive bel ...
Continuously Variable Transmission (CVT) (if so
equipped)
Without Intelligent Key
The ignition lock is designed so that the ignition
switch cannot be turned to the LOCK position
until the shift selector is moved to the P (Park)
position.
● Wh ...
Tire and loading information label
Sedan
Coupe
The cold tire pressure is shown on the Tire and
Loading Information label. The label is located as
shown. ...
