See also:

Locking doors
Locking doors 1. Place the ignition switch in the LOCK position. 2. Close all doors. 3. Press the button on the Intelligent Key. 4. The hazard warning lights flash twice and the horn beep ...

Operating tips
● Say a command after the tone. Voice commands cannot be accepted when the icon is . ● If the command is not recognized, the system repeats the announcement. Repeat the command in a c ...

After the operation
1. Lower the vehicle carefully to the ground. 2. Dispose of waste oil and filter properly. - Prolonged and repeated contact with used engine oil may cause skin cancer. - Try to avoid direct ...