See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Draining of coolant water
If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Changing engine coolant” ...

MODE select switch (models without Navigation System)
Push the MODE select switch to change the mode in the following sequence. AM→FM*→SAT** (if so equipped)→CD***→ USB/iPod*** (if so equipped) → AUX*** → AM * When ...