Opening and closing windows (if so equipped)
The driver’s door key operation allows you to open and close windows equipped with automatic operation at the same time.
● To open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked.
● To close the windows, turn the driver’s door key toward the front of the vehicle for longer than 1 second after the door is locked.
Windows stop when the key cylinder is released.
See also:
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
Before starting the engine
● Make sure the area around the vehicle is
clear.
● Check fluid levels such as engine oil, coolant,
brake and clutch fluid (if so equipped),
and windshield-washer fluid as frequentl ...
Standard Mode command list
Category Command:
Phone Command:
Navigation Command:
Information Command:
Audio Command:
...