See also:

Starting the engine
1. Apply the parking brake. 2. Move the shift selector to P (Park) or N (Neutral). P (Park) is recommended. The starter is designed not to operate if the shift selector is in any of the driving ...

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Front power seat adjustment
Operating tips: - The seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait for a while, then reactivate the switch. - Do not operate the power se ...