Dehumidified defrosting or defogging
1. Press the defroster control button
to
turn the system on. The indicator light in the
button will illuminate.
2. Turn the temperature dial to the left or right to set the desired temperature.
● To quickly remove ice from the outside of the windows, turn the manual fan control to HI.
● As soon as possible after the windshield is clean, press the AUTO button to return to the auto mode.
● When the control is activated,
the air
conditioner will automatically be turned on at
outside temperatures above 36°F (2°C).
This dehumidifies the air which helps defog
the windshield. The air recirculation mode
automatically turns off, allowing outside air
to be drawn into the passenger compartment
to further improve the defogging performance.
See also:
LATCH (Lower Anchors and Tethers for
CHildren) System
LATCH system lower anchor locations
Your vehicle is equipped with special anchor
points that are used with LATCH (Lower Anchors
and Tethers for CHildren) system compatible
child restraints. This ...
“Connect Phone”
NOTE.
The Add Phone command is not available
when the vehicle is moving.
Use the Connect Phone commands to manage
the phones connecting to the vehicle or to enable
the Bluetooth function on ...
If your vehicle overheats
If your vehicle is overheating (indicated by an
extremely high temperature gauge reading) or if
you feel a lack of engine power, detect abnormal
noise, etc., take the following steps.
WARNING:
...