Operating tips

● Say a command after the tone. Voice commands cannot be accepted when the icon is ● If the command is not recognized, the system.
● If the command is not recognized, the system repeats the announcement. Repeat the command in a clear voice.
● Press the wheel to return to the previous screen. switch on the steering wheel to return to the previous screen.
● If you want to cancel the command, press and hold the “Voice cancelled” will be announced. switch. The message, “Voice cancelled” will be announced.
● If you want to adjust the volume of the system feedback, push the volume control switch on the steering wheel or use the audio system volume knob while the system is making an announcement.
● To minimize the amount of prompts spoken by the system in Alternate Command Mode, use the Minimize Voice Feedback function. To access the Minimize Voice Feedback function press the SETTING button, then select the “Others” key. Then select the “Voice Recognition” key.

    See also:

    Operating tips
    ● Keep the windows and moonroof closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the pa ...

    Washing
    Wash dirt off with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (ne ...

    SOURCE select switch
    With the ignition switch turned to the ACC or ON position, push the SOURCE select switch to turn the audio system on. Push the switch to change the mode in the sequence of AM, FM, SAT, CD, iPo ...