Engine serial number


The number is stamped on the engine as shown.
See also:
Installing front license plate
Use the following steps to mount the front license
plate:
(1) Make holes on the plastic finisher at the
location mark (small dimple) using a 0.31 in
(8 mm) drill. Apply light pressure to the ...
Brightness button
To change the display brightness, press
the button. Pressing the button
again will
change the display to the day or the
night display.
If no operation is performed within 5 seconds, the
disp ...
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
