Manual operation

Fan speed control

Turn the dial to manuallyfan speed control dial to manually control the fan speed.

Push the AUTO button to return to automatic control of the fan speed.

Air recirculation Push the air recirculation button to recirculate interior air inside the vehicle. The indicator light on the button will come on.

The air recirculation cannot be activated when the air conditioner is in the front defrosting mode or the front defrosting and foot outlet mode.

Air recirculation

Push the button to recirculate air recirculation button to recirculate interior air inside the vehicle. The indicator light on the button will come on. indicator light on the button will come on.

The air recirculation cannot be activated when the air conditioner is in the defrostingfront defrosting mode or the and foot outletfront defrosting and foot outlet mode.

Fresh air intake

Push the button to drawfresh air intake button to draw outside air into the passenger compartment.

The button will comeindicator light on the button will come on.

Automatic intake air control

In the AUTO mode, the intake air will be controlled automatically. To manually control the intake air, push the recirculation button. air recirculation button.

To return to the automatic control mode, push and hold the button orair recirculation button or push and hold the intake buttonfresh air intake button for about 2 seconds. The indicator lights (both air recirculation and fresh air intake buttons) will flash twice, and then the intake air will be controlled automatically.

Air flow control

Pushing the MODE button manually controls air flow and selects the air outlet:

side- Air flows from center and side vents.

side- Air flows from center and side vents and foot outlets.

outlets. - Air flows mainly from foot outlets.

foot- Air flows from defroster and foot outlets.

outlets. - Air flows from defroster outlets.

To turn system off

Press the OFF button.

    See also:

    Clearing the programmed information
    Individual buttons cannot be cleared, however to clear all programming, push and hold the two outside buttons and release when the indicator light begins to flash (in approximately 20 seconds) ...

    After the operation
    1. Lower the vehicle carefully to the ground. 2. Dispose of waste oil and filter properly. - Prolonged and repeated contact with used engine oil may cause skin cancer. - Try to avoid direct ...

    Dimensions and weights
    1: Without front license plate bracket 2: With front license plate bracket 3: With roof rail ...