Class I hitch
Class I trailer hitch equipment (receiver, ball mount and hitch ball) can be used to tow trailers of a maximum weight of 2,000 lb (909 kg).
You may add Class I trailer hitch equipment that has a 2,000 lb (909 kg) maximum weight rating to the vehicle, but your vehicle is only capable of towing the maximum trailer weights shown in the Towing Load/Specification chart earlier in this section.
CAUTION
● Do not use axle-mounted hitches.
● The hitch should not be attached to or
affect the operation of the impactabsorbing
bumper.
● Do not modify the vehicle exhaust system,
brake system, etc. to install a
trailer hitch.
● To reduce the possibility of additional
damage if your vehicle is struck from
the rear, where practical, remove the
receiver when not in use.
● After the hitch is removed, seal the bolt
holes to prevent exhaust fumes, water
or dust from entering the passenger
compartment.
● Regularly check that all trailer hitch
mounting bolts are securely mounted.
See also:
Vents
Adjust air flow direction for the driver’s and passenger’s
side 1 , and center 2 ventilators by
moving the ventilator slide and/or ventilator assemblies.
Open or close the ventilators 1 by ...
Loading tips
-The GVW must not exceed GVWR
or GAWR as specified on the
F.M.V.S.S./C.M.V.S.S. certification
label.
- Do not load the front and rear axle to
the GAWR. Doing so will exceed the
GVWR.
WARNI ...
USB interface (models with Navigation System)
Connecting a device to the USB input
jack
The USB input jack is located in the center console.
Open the protective cover 1 on the USB
jack, then insert the USB device into the jack.
When a co ...