See also:

If the windows do not close automatically
If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Turn the ignition switch to the ON pos ...

Vehicle set-up
1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn the engine off and wait more than 10 min ...

Hood
1 Pull the hood lock release handle located below the driver’s side instrument panel; the hood springs up slightly. 2 Lift the lever at the front of the hood with your fingertips and raise the ...