See also:

Fail-safe
If the vehicle is driven under extreme conditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. The MIL may come on to indicate the fail-saf ...

Programming HomeLink
1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light 1 blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand-held ...

Capacities and recommended fuel/lubricants
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the Maintenance and do-it-yourself section to de ...