Operating tips

-When the engine coolant temperature and

-When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant temperature warms up, air flow from the foot outlets will operate normally.

The sunload sensor, located on the top drivers side of the instrument panel, helps the system maintain a constant temperature. Do not put anything on or around this sensor.

    See also:

    Programming HomeLink for Canadian customers
    Prior to 1992, D.O.C. regulations required handheld transmitters to stop transmitting after 2 seconds. To program your hand-held transmitter to HomeLink, continue to press and hold the HomeLink ...

    All-Wheel Drive (AWD) lock switch operations
    The AWD LOCK switch located on the lower side of the instrument panel. This switch is used to select the AUTO or LOCK mode depending on the driving conditions. Each time you push the lower pa ...

    Checking engine oil level
    1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. Turn off the engine. Wait more than 10 minu ...