NISSAN Voice Recognition Alternate Command Mode

The Alternate Command Mode enables control of the Audio, Climate Control and Display systems as well as additional commands for the Vehicle Information, Phone and Navigation systems. With this setting active, the system does not announce or display the available commands at each step.

When Alternate Command Mode is activated, an expanded list of commands can be used after pushing the TALK mode, the screen for Standard Mode commands switch. Under this mode, the screen for Standard Mode commands is not available on the display. Please review the expanded command list, available when this mode is active, as some Standard Mode commands are replaced. Please see examples of Alternate Command Mode screens.

Please note that in this mode the recognition success rate may be affected as the number of available commands and ways of speaking each command are increased. You can turn this mode ON or OFF. When this mode is activated, the Voice Recognition Settings will change to show more options.

See also:

Under the Hood
A 3.5-liter V-6 engine sends 245 horsepower to Nissan’s Xtronic CVT, which has no gears but works with a steel belt and twin pulleys. An available Vehicle Dynamic Control system improves stabili ...

How to use brightness control and display ON/OFF button
To change the display brightness, push the button. Pushing the button again will change the display to the day or the night display. If no operation is performed within 5 seconds, the display ...

NISSAN Intelligent Key™ (if so equipped)
Replace the battery in the Intelligent Key as follows. 1. Remove the mechanical key from the Intelligent Key. 2. Insert a small screwdriver A into the slit B of the corner and twist it to sepa ...