To protect your vehicle from corrosion

● Wash and wax your vehicle often to keep the vehicle clean.
● Always check for minor damage to the paint and repair it as soon as possible.
● Keep drain holes at the bottom of the doors open to avoid water accumulation.
● Check the underbody for accumulation of sand, dirt or salt. If present, wash with water as soon as possible.

CAUTION

● NEVER remove dirt, sand or other debris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom.
● Never allow water or other liquids to come in contact with electronic components inside the vehicle as this may damage them.

Chemicals used for road surface de-icing are extremely corrosive. They accelerate corrosion and deterioration of underbody components such as the exhaust system, fuel and brake lines, brake cables, floor pan and fenders.

In winter, the underbody must be cleaned periodically.

For additional protection against rust and corrosion, which may be required in some areas, consult a NISSAN dealer.

See also:

Blocking wheels
Blocking wheels Place suitable blocks 1 at both the front and back of the wheel diagonally opposite the flat tire 2 to prevent the vehicle from moving when it is jacked up. Be sure to bl ...

Crew Cab
Maximum towing capacity: 6,300 pounds (4x2), 6,100 pounds (4x4 V-6) Maximum payload range: 1,125-1,437 pounds (depending on trim, transmission) Standard bed dimensions: 59.5 inches long, 58.8 inches ...

Freeing a frozen door lock
To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on ...