Supplemental restraint system

See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Others settings
Select the “Others” key. Comfort settings, language and units and Voice Recognition settings will be displayed. Comfort settings Select the “Others” key, then select the “Comfort” ...

Engine block heater (if so equipped)
WARNING: - Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded connec ...