See also:

Locking doors
Locking doors 1. Place the ignition switch in the LOCK position. 2. Close all doors. 3. Press the button on the Intelligent Key. 4. The hazard warning lights flash twice and the horn beep ...

Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed. 2. Wh ...

Capacities and recommended fuel/lubricants
1: For additional information, see “Engine oil” in the “8. Maintenance and do-it-yourself” section for changing engine oil. 2: For additional information, see “Engine oil and oil filter ...