Brake and clutch (if so equipped) fluid

For further brake and clutch fluid specification information, refer to “Capacities and recommended fuel/lubricants” in the “Technical and consumer information” section of this manual.

● Use only new fluid from a sealed container.

● Use only new fluid from a sealed container.

Old, inferior or contaminated fluid may damage the brake and clutch (if so equipped) systems. The use of improper fluids can damage the brake and clutch system and affect the vehicle’s stopping ability.

● Clean the filler cap before removing.

● Brake and clutch fluid is poisonous and should be stored carefully in marked containers out of reach of children.

Do not spill the fluid on any painted surfaces.

Do not spill the fluid on any painted surfaces.

This will damage the paint. If fluid is spilled, immediately wash the surface with water.

See also:

Continuously Variable Transmission (CVT) (if so equipped)
Without Intelligent Key The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the shift selector is moved to the P (Park) position. ● Wh ...

Drive belt
QR25DE engine 1. Power steering fluid pump pulley 2. Water pump pulley 3. Generator 4. Air conditioner 5. Crankshaft pulley 6. Drive belt Automatic tensioner WARNING Be sure the ignition swi ...

Engine coolant temperature gauge
The gauge indicates the engine coolant temperature. The engine coolant temperature is within the normal range 1 when the gauge needle points within the zone shown in the illustration. The engine ...