Locking with key
Locking with key
The power door lock system allows you to lock or unlock all doors simultaneously.
- Turning the driver’s door key cylinder to the front of the vehicle 1 will lock all doors and the lift gate.
- Turning the driver’s door key cylinder once to the rear of the vehicle 2 will unlock the driver’s door. After returning the key to the neutral position, turning it to the rear again within 5 seconds will unlock all doors and the lift gate.
See also:
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
Replacing
1. Lift the wiper arm away from the windshield.
2 Push the release tab, then move the wiper
blade down the wiper arm to remove.
3 Remove the wiper blade.
4. Insert the new wiper blade onto the w ...
Vents
Center
Adjust air flow direction by moving the vent
slides.
Open or close the vents by using the dial. Move
the dial toward the to open
the vents or
toward the to close them.
Side
Re ...