Unlocking doors

1. Push the UNLOCK the button 2 on the Intelligent Key.

2. The hazard indicator flashes once. The driver’s door will unlock.

3. Push the UNLOCK within button again within 5 seconds.

4. The hazard indicator flashes once. All the doors and the lift gate will unlock.

All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the UNLOCK button button while the doors are locked.

- Opening any doors.

- Pushing the ignition switch.

- Inserting the mechanical key into the ignition switch.

During this 1-minute time period, if the UNLOCK button is pushed, all doors will be locked button is pushed, all doors will be locked automatically after another 1 minute.

    See also:

    Most common factors contributing to vehicle corrosion
    ● The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. ● Damage to paint and other protective coatings caused by gravel and ston ...

    Brake pad wear warning
    The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is ...

    Loading tips
    ● The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. ● Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR ...