See also:

Programming HomeLink
1. To begin, press and hold the two outer HomeLink buttons (to clear the memory) until the indicator light 1 blinks (after 20 seconds). Release both buttons. 2. Position the end of the hand-held ...

Windshield wiper blades. Replacing
Replace the wiper blades if they are worn. 1. Lift the wiper arm away from the windshield. 2. Push the release tab, then move the wiper blade down the wiper arm to remove. 3. Remove the wiper bla ...

Fog light switch (if so equipped)
To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the position. To turn the fog lights on with the headlight switch in the AUTO position (if ...