Manual operation

The manual mode can be used to control the heater and air conditioner to your desired settings.

To turn off the heater and air conditioner, turn the fan control dial to the OFF position.

Fan speed control:

Turn the fan speed control dial clockwise to increase the fan speed.

Turn the fan speed control dial counterclockwise to decrease the fan speed.

Turn the fan speed control dial to the AUTO position to change the fan speed to the automatic mode.

Air flow control:

Turn the air flow control dial to change the air flow mode.

side ventilators. : Air flows from the center and side ventilators.

side ventilators : Air flows from the center and side ventilators and foot outlets.

outlets. : Air flows mainly from the foot outlets.

foot : Air flows from the defroster and foot outlets.

Temperature control:

Turn the temperature control dial to set the desired temperature.

Air recirculation:

Push the outside air circulation recirculation/air recirculation button to change the air circulation button to change the air circulation mode.

When the indicator below the air recirculation icon is illuminated, the flowing air is icon is illuminated, the flowing air is recirculated inside the vehicle.

Outside air circulation:

Push the outside air circulation recirculation/air recirculation button to change the air circulation button to change the air circulation mode.

When the indicator below the outside air circulation the flowing icon is illuminated, the flowing air is drawing from outside the vehicle.

Automatic air intake control:

Press the outside air circulation recirculation/air recirculation button once to change operation of button once to change operation of the air conditioner in the following order.

Air recirculation mode air circulation Outside air circulation mode Air recirculation mode Automatic control mode When automatic control mode is set, the air Air recirculation mode

When automatic control mode is set, the air recirculation indicator and outside air circulation indicator will turn off.

    See also:

    Readiness for inspection/maintenance (I/M) test
    Due to legal requirements in some states and Canadian Provinces, your vehicle may be required to be in what is called the “ready condition” for an Inspection/Maintenance (I/M) test of the emis ...

    If the windows do not close automatically
    If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Turn the ignition switch to the ON pos ...

    Changing wheels and tires
    Tire rotation NISSAN recommends rotating the tires every 7,500 miles (12,000 km). (See “Flat tire” in the “6. In case of emergency” section for tire replacing procedures.) As soon as ...