See also:

Replacing
1. Lift the wiper arm away from the windshield. 2 Push the release tab, then move the wiper blade down the wiper arm to remove. 3 Remove the wiper blade. 4. Insert the new wiper blade onto the w ...

Reprogramming a single HomeLink® button
To reprogram a HomeLink® Universal Transceiver button, complete the following. 1. Push and hold the desired HomeLink® button. Do not release the button until step 4 has been completed. 2. Wh ...

DOOR position
When the switch is in the DOOR position 2 , the ceiling light will illuminate under the following conditions: - ignition switch is turned to the LOCK position — remain on for about 15 seco ...