Installing top tether strap
INSTALLING TOP TETHER STRAP
First, secure the child restraint with the Latch lower anchors (rear outboard seat positions only) or the seat belt, as applicable.
1. Flip up the anchor covers from the anchor point which is located directly behind the child seat.
2. Position the top tether strap over the top of the seatback.
3. Secure the tether strap to the tether anchor point on the rear parcel shelf.
4. Tighten the tether strap according to the manufacturers instructions to remove any slack.
If you have any questions when installing a top tether strap, consult your NISSAN dealer for details.
See also:
Cruise set switch indicator
light
The light comes on while the vehicle speed is
controlled by the cruise control system. If the light
blinks while the engine is running, it may indicate
the cruise control system is not functionin ...
Uniform tire quality grading
DOT (Department of Transportation) Quality
Grades: All passenger car tires must conform to
federal safety requirements in addition to these
grades.
Quality grades can be found where applicable on
...
Fastening the seat belts
1. Adjust the seat. See “Seats” earlier in this
section.
2 Slowly pull the seat belt out of the retractor
and insert the tongue into the buckle until
you hear and feel the latch engage.
& ...