Locking with power door lock switch

To lock all the doors without a key, push the door

To lock all the doors without a key, push the door lock switch (drivers or front passengers side) to the lock position (1) . When locking the door this way, be certain not to leave the key inside the vehicle.

To unlock all the doors without a key, push the door lock switch (drivers or front passengers side) to the unlock position (2).

Lockout protection

When the power door lock switch (drivers or front passengers side) is moved to the lock position with the Intelligent Key in the port and any door open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle (not in the Intelligent Key port) and any door open, all doors will unlock automatically and a chime will sound after the door is closed.

    See also:

    Engine block heater (if so equipped)
    Engine block heaters are used to assist in cold temperature starting. The engine block heater should be used when the outside temperature is 208F (−78C) or lower. To use the engine block h ...

    Changing engine oil filter
    1. Park the vehicle on a level surface and apply the parking brake. 2. Turn the engine off. 3. Place a large drain pan under the oil filter (A) . 4. Loosen the oil filter (A) with an oil filter ...

    SAFETY
    For the kids, the Juke was fun, too. They loved the way it looked, but there was a problem with the seat belts. The buckles were too buried in the seat cushions to make them easy to use for my 6- ...