Automatic anti-glare rearview mirror
The inside mirror is designed so that it automatically dims during night time conditions and according to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is placed in the ON position.
Do not hang any objects over the sensors (1) or apply glass cleaner to the sensors.
Doing so will reduce the sensitivity of the sensors, resulting in improper operation.
Type A
Type A
The indicator light (2)- will illuminate when the automatic anti-glare feature is operating.
With the ignition switch placed in the ON position,
press the button as described:
- To turn off the anti-glare feature, press
the button. The indicator light
will turn
off.
- To turn on the anti-glare feature, press
the button again. The indicator
light
will turn on.
For information on the compass display (if so equipped), see Compass display in the Instruments and controls section of this manual.
Type B-Without compass
Type B and Type C
The indicator light (2)- will illuminate when the automatic anti-glare feature is operating.
To turn off the automatic anti-glare feature, press:
- the button for inside
mirrors without
compass.
- the button for inside mirrors
with
compass.
The indicator light will turn off.
Type C-With compass
To turn on the automatic anti-glare feature again, press:
- the button for inside
mirrors without
compass.
- the button for inside
mirrors with
compass.
The indicator light will turn on.
Some vehicles are also equipped with automatic anti-glare outside mirrors. For additional information, see Automatic anti-glare outside mirrors in this section.
For information on HomeLink Universal Transceiver operation, see the HomeLink Universal Transceiver in the Instruments and controls section of this manual.
For information on the compass display (if so equipped), see Compass display in the Instruments and controls section of this manual.
See also:
Turn signal switch
Turn signal
(1) Move the lever up or down to signal the
turning direction. When the turn is completed,
the turn signals cancel automatically.
Lane change signal
(2)- To signal a lane cha ...
Towing load/specification
*1: The towing capacity values are calculated
assuming a base vehicle with driver and any
options required to achieve the rating. Additional
passengers, cargo and/or optional equipment
will ...
Bluetooth streaming audio (if so
equipped)
● Some Bluetooth audio devices may not be
recognized by the in-vehicle audio system.
● It is necessary to set up the wireless connection
between a compatible Bluetooth
audio device an ...