Getting started

The following procedures will help you get started using the Bluetooth Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, refer to List of voice commands in this section.

Choosing a language

You can interact with the Bluetooth Hands-Free Phone System using English, Spanish or French.

To change the language, perform the following.

1. Press and hold the for morebutton for more than 5 seconds.

2. The system announces: Press the PHONE/SEND (hands-free phone system to enter the ) button for the hands-free phone system to enter the speaker adaptation mode or press the PHONE/END (select a different ) button to select a different language.

3. Press the For information on speaker adaptation, seebutton.

For information on speaker adaptation, see Speaker adaptation (SA) mode in this section.

4. The system announces the current language and gives you the option to change the language to Spanish (in Spanish) or French (in French). Use the following chart to select the language.

NOTE:

You must press the orbutton or the change the language.button within 5 seconds to change the language.

5. If you decide not to change the language, do

5. If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed.

For color monitor system language change, see Language/Units in this section.

Pairing procedure

NOTE:

The pairing procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled.

1. Press the button on the

1. Press the steeringbutton on the steering wheel. The system announces the available commands.

2. Say: Connect phone (A) . The system acknowledges the command and announces the next set of available commands.

3. Say: Add phone (B). The system acknowledges the command and asks you to initiate pairing from the phone handset (C).

The pairing procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Owners Manual for details. You can also visit www.nissanusa.com/bluetooth for instructions on pairing NISSAN recommended cellular phones.

When prompted for a Passkey code, enter 1234 from the handset. The Passkey code 1234 has been assigned by NISSAN and cannot be changed.

4. The system asks you to say a name for the phone (D).

If the name is too long or too short, the system tells you, then prompts you for a name again.

Also, if more than one phone is paired and the name sounds too much like a name already used, the system tells you, then prompts you for a name again.

Making a call by entering a phone
Making a call by entering a phone number

1. Press the steeringbutton on the steering wheel. A tone will sound.

2. Say: Call (A) . The system acknowledges the command and announces the next set of available commands.

Say: Special Dialing to dial more than 10 digits or any special characters.

3. Say Phone Number (B). The system acknowledges the command and announces the next set of available commands.

4. Say the number you wish to call starting with the area code in single digit format (C). If the system has trouble recognizing the correct phone number, try entering the number in the following groups: 3-digit area code, 3-digit prefix and the last 4-digits. For example, 555-121-3354 can be said as five five five as the 1st group, then one two one as the 2nd group, and three three five four as the 3rd group. For dialing more than 10 digits or any special characters, say Special Dialing. See How to say numbers in this section for more information.

5. When you have finished speaking the phone number, the system repeats it back and announces the available commands.

6. Say: Dial (D). The system acknowledges the command and makes the call.

For additional command options, see List of voice commands in this section.

Receiving a call

When you hear the ring tone, press thebutton on the steering wheel. button on the steering wheel.

Once the call has ended, press the on the steering wheel.button on the steering wheel.

NOTE:

If you do not wish to take the call when you hear the ring tone, press the on the steering wheel.button on the steering wheel.

For additional command options, see List of voice commands later in this section.

    See also:

    Passenger compartment
    CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the electrical system or cause a fire. If any electrical equipment does not ...

    Locking doors
    Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...

    Odometer/twin trip odometer
    The odometer and twin trip odometer are displayed on the vehicle information display when the ignition switch is in the ON position. Odometer The odometer A records the total distance the ve ...