See also:

Troubleshooting guide
The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error. Where the solutions a ...

Locking doors
Locking doors 1. Place the ignition switch in the LOCK position. (Remove the key if any key is in the ignition switch.) 2. Close all doors. 3. Push any door handle request switch 1 while ca ...

Connecting procedure
NOTE: The connecting procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled. 1. Push the button on t ...