Hazard warning flasher switch

Hazard warning flasher switch
Hazard warning flasher switch

Push the switch on to warn other drivers when you must stop or park under emergency conditions.

All turn signal lights flash.

● If stopping for an emergency, be sure to

● If stopping for an emergency, be sure to move the vehicle well off the road.

● Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.

● Turn signals do not work when the hazard warning flasher lights are on.

The flashers will operate with the ignition switch placed in any position.

Some state laws may prohibit the use of the hazard warning flasher switch while driving.

    See also:

    Checking engine coolant level
    Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level (B)- , add coolant to the MAX level (A) . If the reservoir is empty, check the co ...

    Continuously Variable Transmission (CVT)
    The ignition lock is designed so that the ignition switch cannot be turned to the LOCK position until the selector lever is moved to the P (Park) position. - When turning the ignition switch to ...

    Operating tips
    To get the best performance out of the NISSAN Voice Recognition system, observe the following. ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surr ...