Terms
It is important to familiarize yourself with the following terms before loading your vehicle.
● Curb Weight (actual weight of your vehicle) - vehicle weight including.
standard and optional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo.
● GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo.
● GVWR (Gross Vehicle Weight Rating) - maximum total combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equipment. This information is located on the F.M.V.S.S./C.M.V.S.S.
certification label.
● GAWR (Gross AxleWeight Rating) - maximum weight (load) limit specified for the front or rear axle. This information is located on the F.M.V.S.S./C.M.V.S.S. certification label.
● GCWR (Gross Combined Weight rating) - The maximum total weight rating of the vehicle, passengers, cargo, and trailer.
● Vehicle Capacity Weight, Load limit, Total load capacity - maximum total weight limit specified of the load (passengers and cargo) for the vehicle.
This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be included as part of the cargo load. This information is located on the Tire and Loading Information label (if so equipped).
● Cargo capacity - permissible weight of cargo, the subtracted weight of occupants from the load limit.
See also:
Safety
The Nissan Rogue gets top safety marks. It was named a 2009 Top Safety Pick
by the Insurance Institute for Highway Safety. To receive this award, a car must
earn the top rating of Good in frontal, ...
Safety chains
Always use suitable safety chains between your
vehicle and the trailer. The safety chains should
be crossed and should be attached to the hitch,
not to the vehicle bumper or axle. Be sure to lea ...
Getting started
Before using the Voice Recognition system for
the first time, you can confirm how to use commands
by viewing the Getting Started section of
the User Guide.
1. Select the “Getting Started” ke ...
