Installing child restraint LATCH lower anchor attachments

LATCH webbing-mounted attachment
LATCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to anchors located at certain seating positions in your vehicle. With this system, you do not have to use a vehicle seat belt to secure the child restraint. Check your child restraint for a label stating that it is compatible with LATCH. This information may also be in the instructions provided by the child restraint manufacturer.

LATCH rigid attachment
When installing a child restraint, carefully read and follow the instructions in this manual and those supplied with the child restraint.
See also:
NISSAN Intelligent Key™ (if so equipped)
Replace the battery in the Intelligent Key as follows.
1. Remove the mechanical key from the Intelligent
Key.
2. Insert a small screwdriver A into the slit B
of the corner and twist it to sepa ...
Traction AA, A, B and C
The traction grades, from highest to lowest, are
AA, A, B and C. Those grades represent the
tire’s ability to stop on wet pavement as
measured under controlled conditions on specified
govern ...
FM radio reception
Range: FM range is normally limited to 25 – 30 mi
(40 – 48 km), with monaural (single channel) FM
having slightly more range than stereo FM. External
influences may sometimes interfere with FM
...
