Seat belt maintenance

-To clean the seat belt webbing, apply a mild soap solution or any solution recommended for cleaning upholstery or carpet.

Then wipe with a cloth and allow the seat belts to dry in the shade. Do not allow the seat belts to retract until they are completely dry.

- If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoulder belt guide with a clean, dry cloth.

- Periodically check to see that the seat belt and the metal components, such as buckles, tongues, retractors, flexible wires and anchors work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.

    See also:

    Off-road recovery
    If the right side or left side wheels leave the road surface, maintain control of the vehicle by following the procedure below. Please note that this procedure is only a general guide. The veh ...

    Engine
    This spark ignition system complies with the Canadian standard ICES-002. ...

    Digital Versatile Disc (DVD) Player Operation (models with Navigation System)
    Precautions Start the engine when using the DVD entertainment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Aud ...