Automatic operation (if so equipped)

Tilt operation
Tilt operation

Push the switch (1) up or down to adjust the steering wheel to the desired position.

Entry/Exit function

The automatic drive positioner system will make the steering wheel move up automatically when the drivers door is opened and the ignition switch is in the LOCK position. This lets the driver get into and out of the seat more easily. The steering wheel moves back into position when the drivers door is closed and the ignition switch is pushed.

For more information, see Automatic drive positioner in this section.

Telescopic operation

Push the switch (1) forward or backward to adjust the steering wheel to the desired position.

    See also:

    NISSAN Advanced Air Bag System (front seats)
    This vehicle is equipped with the NISSAN Advanced Air Bag System for the driver and front passenger seats. This system is designed to meet certification requirements under U.S. regulations. It is ...

    Locking with key
    Driver’s side Manual (if so equipped) To lock a door, turn the key toward the front of the vehicle 1 . To unlock, turn the key toward the rear 2 . Power (if so equipped) The power door l ...

    Engine block heater (if so equipped)
    ● Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded connec ...