Vehicle recovery (freeing a stuck vehicle)

Pulling a stuck vehicle
Pulling a stuck vehicle

Do not use the hook (if so equipped) to tow the vehicle.

WARNING:

- Stand clear of a stuck vehicle.

- Do not spin your tires at high speed.

This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged.

CAUTION:

- Tow chains or cables must be attached only to the main structural members of the vehicle. Otherwise, the vehicle body will be damaged.

- Do not use the vehicle tie downs to free a vehicle stuck in sand, snow, mud, etc.

Never tow the vehicle using the vehicle tie downs or recovery hooks.

- Always pull the cable straight out from the front or rear of the vehicle. Never pull the vehicle at an angle.

- Pulling devices should be routed so they do not touch any part of the suspension, steering, brake or cooling systems.

- Pulling devices such as ropes or canvas straps are not recommended for use in vehicle towing or recovery.

Rocking a stuck vehicle

If your vehicle is stuck in sand, snow, mud, etc., use the following procedure:

1. Turn off the Vehicle Dynamic Control System.

2. Make sure the area in front and behind the vehicle is clear of obstructions.

3. Turn the steering wheel right and left to clear an area around the front tires.

4. Slowly rock the vehicle forward and backward.

- Shift back and forth between R (Reverse) and D (Drive).

- Apply the accelerator as little as possible to maintain the rocking motion.

- Release the accelerator pedal before shifting between R (Reverse) and D (Drive).

- Do not spin the tires above 35 mph (55 km/h).

5. If the vehicle cannot be freed after a few tries, contact a professional towing service to remove the vehicle.

    See also:

    How to use the INFO button
    Press the INFO button; the display screen shows vehicle and navigation information for your convenience. Where am I? Refer to the separate Navigation System Owner’s Manual for information rega ...

    Air pollution
    Industrial pollution, the presence of salt in the air in coastal areas, or heavy road salt use will accelerate the corrosion process. Road salt will also accelerate the disintegration of paint ...

    Maintenance precautions
    When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The following are general precauti ...