Instrument brightness control
Instrument brightness control
The instrument brightness control operates when
the headlight control switch is in the
or 
position and the ignition switch is
placed in the ON position.
The brightness level will be shown briefly in the meter’s display area whenever the control is operated.
Turn the control to adjust the brightness of instrument panel lights when driving at night. When the maximum or minimum intensity is met, a short chime will sound.
See also:
Heater operation
Heating
This mode is used to direct heated air to the foot
outlets. Some air also flows from the defrost
outlets and the side vent outlets.
1. Press the button to the OFF
position
for normal h ...
NISSAN Intelligent Key™ door buzzer
The Intelligent Key door buzzer sounds if the
Intelligent Key is left inside the vehicle when
locking the doors. When the buzzer sounds, be
sure to check both the vehicle and the Intelligent
Key. ...
Antenna
Antenna
To remove the antenna, hold the bottom of the
antenna and turn it counterclockwise.
To install the antenna, turn the antenna clockwise
and tighten.
- To avoid damaging or deformin ...