Electric control type
The outside mirror remote control only operates when the ignition switch is in the ACC or ON position.
Rotate the control lever to select the right or left mirror. Adjust the mirror to the desired position by moving the control lever.
See also:
Tire labeling
Example
Federal law requires tire manufacturers to
place standardized information on the sidewall
of all tires. This information identifies
and describes the fundamental characteristics
of ...
Clearing the programmed information
Individual buttons cannot be cleared. However,
to clear all programming, press and hold the two
outside buttons and release when the indicator
light begins to flash (approximately 20 seconds). ...
If the moonroof does not close
Have your NISSAN dealer check and repair the
moonroof. ...