Nissan Versa: Appearance and care - Cleaning interior
To keep the cabin of your Nissan Versa looking pristine and well-maintained, occasionally remove loose dust and debris from the interior trim, plastic parts, and fabric seats using a handheld vacuum cleaner or a soft-bristled brush. Gently wipe the vinyl surfaces and leather trim (if so equipped) with a clean, soft cloth lightly dampened in a mild soap solution, then wipe them completely dry with a separate soft cloth.
Regular care and routine cleaning are required in order to maintain the supple texture and long-term appearance of the leather upholstery (if so equipped).
Before applying any aftermarket fabric protector to your cabin seats, carefully read and follow the manufacturer's recommendations. Some fabric protection formulas contain active chemicals that may stain, discolor, or bleach the seat material.
Use a clean cloth dampened exclusively with water to gently clean the instrument cluster meter and gauge lenses.
WARNING
- Do not use wax-based or silicone-based cleaning products anywhere in the interior of your vehicle.
Doing so may cause lasting physical damage to interior trim parts, delicate electrical devices, or sensitive electronic components.
- Do not use liquid water or acidic high-temperature cleaning methods, such as hot steam cleaners, on the seats. This can severely damage the seat structure or internal occupant classification sensor. This type of damage can also disrupt the proper operation of the airbag system and result in serious personal injury during a collision.
CAUTION
- Never use benzine, paint thinner, or any similar harsh chemical solvents for interior cleaning.
- Small dirt particles and grit can be highly abrasive and damaging to leather surfaces (if so equipped) and should be removed promptly. Do not use saddle soap, automotive car waxes, polishes, oils, harsh cleaning fluids, chemical solvents, household detergents, or ammonia-based cleaners, as they will strip and damage the leather's natural protective finish.
- Never use fabric protectors unless they are explicitly recommended by the vehicle manufacturer.
- Do not use glass cleaners or plastic sprays on the meter or gauge lens covers, as harsh chemicals may permanently crack or damage the clear lens cover.
- Do not spill or allow direct contact on interior surfaces while handling liquid air fresheners, aroma diffusion agents, cosmetics, hand lotions, or sunscreen. Their chemical ingredients can cause permanent discoloration, stubborn staining, surface cracking, or paint peeling. If any of these substances accidentally contact an interior surface, wipe them off immediately using a clean soft cloth.
- Do not use aggressive chlorine-based cleaning liquids, such as chlorine dioxide or hypochlorous acid solutions, which may cause paint peeling and corrosion on interior components. If cleaning or sterilizing interior surfaces is unavoidable, use a mild solution containing less than 75% ethanol.
Wipe off the ethanol residue completely after cleaning. Leaving it uncleaned may cause paint peeling, fading, and discoloration.
Because ethanol is highly flammable, exercise extreme caution around open flames or ignition sources.
- Never use harsh chloride solutions for cleaning aluminum decorative trim pieces (if so equipped), as permanent surface damage may occur.
Air fresheners
Most commercial air fresheners utilize chemical solvents that can negatively affect the vehicle interior materials if handled improperly. If you choose to use an air freshener inside your Nissan Versa, observe the following precautions:
- Hanging-type air fresheners can cause permanent plastic discoloration and surface melting when they directly touch vehicle interior trim. Always hang the freshener in a location that allows it to swing freely without contacting any dashboard, console, or seat surface.
- Liquid-type air fresheners typically clip directly onto the air conditioning vents. These products can cause immediate structural damage and unsightly discoloration if the liquid is accidentally spilled onto surrounding interior surfaces.
Carefully read and follow all manufacturer instructions and safety warnings before using any air fresheners in your car.
Floor mats

WARNING
To avoid potential accelerator or brake pedal interference that may result in a dangerous collision, personal injury, or fatal accident:
- NEVER place a floor mat on top of another existing floor mat in the driver front position, and never install floor mats upside down or backwards.
- Use exclusively Genuine NISSAN floor mats, or equivalent certified floor mats, that are specifically engineered and designed for use in your exact vehicle model and model year.
- Properly position the floor mats securely in the floorwell using the designated floor mat positioning hooks.
- Always make certain that the floor mat does not interfere with the full travel and operation of the accelerator, brake, or clutch pedals.
- Periodically inspect the floor mats during routine maintenance to confirm they remain correctly installed.
- After cleaning the interior of your Nissan Versa, always check the floor mats to verify they are properly repositioned and secured.
The use of Genuine NISSAN floor mats can extend the service life of your vehicle carpeting and make routine interior vacuuming much easier. Mats should be maintained with regular cleaning and replaced promptly if they become excessively worn or thin.
Floor mat installation
Your vehicle is equipped with specialized floor mat positioning hook anchors. The exact number and physical shape of the floor mat positioning hooks for each seating position will vary depending on your specific vehicle configuration.
When installing Genuine NISSAN floor mats, follow the installation instructions provided with the mat set along with the procedure below:
1. With the ignition switch placed in the OFF position, the shift lever in the P (Park) position for Continuously Variable Transmission models or the N (Neutral) position for manual transmission models, and with the emergency parking brake fully applied, position the floor mat in the floorwell so that the integrated grommet holes align precisely with the floor hooks.
2. Secure the mat grommet holes firmly into the anchoring hooks and ensure that the floor mat is laid flat and properly positioned.
3. Make sure the floor mat does not interfere with normal pedal operation. With the ignition switch still in the OFF position, the shift lever in P (Park) for CVT models or N (Neutral) for manual models, and the parking brake applied, fully depress and release all foot pedals to check clearance. The floor mat must not obstruct pedal travel or prevent any pedal from returning smoothly to its resting position.
It is recommended that you visit an authorized NISSAN dealer if you need professional guidance or details about installing floor mats in your vehicle.

Positioning hooks
The illustration shows the exact layout and location of the floor mat positioning hooks on the cabin floor.
Seat belts
The seat belt webbing can be safely cleaned by wiping the straps with a soft sponge dampened in a mild soap and warm water solution. Always allow the cleaned seat belts to dry completely in the shade before pulling them out or using them again.
WARNING
Do not allow wet or damp seat belts to retract and roll up into the retractor mechanism. NEVER use household bleach, fabric dye, or harsh chemical solvents to clean the seat belts, as these aggressive chemicals will severely weaken the synthetic seat belt webbing and compromise safety in a crash.