Outside temperature display (if so equipped)

The outside temperature function provides a display of the outside temperature when the ignition switch is placed in the ON position.

The display of positive temperatures is unsigned (blank), negative temperatures are prefixed with a minus sign.

    See also:

    Readiness for Inspection/Maintenance (I/M) test
    A vehicle equipped with All-Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. M ...

    Volume control switch
    Push the volume control switch up or down to increase or decrease the volume. Tuning Memory change (radio): Push the tuning switch ( or ) for less than 1.5 seconds to change presets. Seek t ...

    Jump starting
    If jump starting is necessary, see “Jump starting” in the “In case of emergency” section of this manual. If the engine does not start by jump starting, the battery may have to be replace ...