Engine oil

See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Interior light
Type A The interior light has a three-position switch and operates regardless of ignition switch position. ● When the switch is in the ON position 1 , the interior light illuminates, regar ...

Tire pressures
● When towing a trailer, inflate the vehicle tires to the recommended cold tire pressure indicated on the Tire and Loading Information label. ● Trailer tire condition, size, load ra ...