ON position

When the switch is in the ON position 1 , the map lights will illuminate.

    See also:

    Environmental factors influence the rate of corrosion
    Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle and should be removed for dry ...

    Installing front license plate
    Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

    Clock
    The following display will appear after pressing the SETTING button, then selecting the “Clock” key. On-screen Clock: When this item is enabled (indicator light illuminated), a clock is alw ...