Unlocking doors
1. Push the UNLOCK 
button 2 on
the
keyfob.
- The driver’s door unlocks.
- The hazard indicator flashes once if all doors are completely closed.
2. Push the UNLOCK button again
within
5 seconds.
- All the doors and the lift gate unlock.
- The hazard indicator flashes once if all doors are completely closed.
All doors will be locked automatically unless one
of the following operations is performed within 1
minute of pushing the UNLOCK
button.
- Any door or lift gate is opened.
- The ignition switch is turned to the ON position.
See also:
FM-AM-SAT radio operation
When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the channel
last played.
The last channel played will also come on ...
Locking doors
Locking doors
1. Move the shift selector to the P (Park) position,
place the ignition switch in the LOCK
position and make sure you carry the Intelligent
Key with you.
2. Close all doors.
3. Pus ...
Tire labeling
Example
Federal law requires tire manufacturers to
place standardized information on the
sidewall of all tires. This information identifies
and describes the fundamental
characteristics of the ...