Automatic operation (AUTO)

The AUTO mode may be used all year around as the system automatically controls constant temperature, air flow distribution and fan speed.

To turn off the heater and air conditioner, turn the fan speed control dial to the OFF position.

Cooling and dehumidified heating:

1. Turn the air flow control dial and fan speed control dial to the AUTO position.

2. If the A/C indicator light does not illuminate, push the A/C button. (The A/C indicator light will illuminate.) 3. Turn the temperature control dial to set the desired temperature.

4. Press the outside air circulation recirculation  button once to change/air recirculation operation of the air conditioner in the button once to change operation of the air conditioner in the following order.

Air recirculation mode ?Outside air circulation mode

Heating (A/C off):

1. Turn the air flow control dial and fan speed control dial to the AUTO position.

2. If the A/C indicator light illuminates, push the A/C button. (The A/C indicator light will turn off.) 3. Turn the temperature control dial to set the desired temperature.

4. Press the outside air circulation recirculation button once to change/air recirculation operation of the air conditioner in thebutton once to change operation of the air conditioner in the following order.

Air recirculation mode air circulation Outside air circulation mode Air recirculation mode Automatic control mode When automatic control mode is set, the air Air recirculation mode

When automatic control mode is set, the air recirculation indicator and outside air circulation indicator will turn off.

- Do not set the temperature lower than the outside air temperature. Doing so may cause the temperature to not be controlled properly.

- If the windows fog up, use dehumidified heating instead of the A/C off heating.

Dehumidified defrosting/defogging:

1. Turn the fan speed control dial to the desired position.

2. Turn the air flow control dial to the position. position.

3. Turn the temperature control dial to set the desired temperature.

- To remove frost from the outside surface of the windshield quickly, set the temperature control dial and fan speed control dial to their maximum position.

- After the windshield is cleared, turn the air flow control dial to the AUTO position to set to the automatic mode.

- When the position is or selected, the air conditioner will automatically position is selected, the air conditioner will automatically turn on when the outside air temperature is above 238F (−58C) to defog the windshield. The air recirculation mode will automatically turn off. The outside air circulation mode be will be selected to improve the defogging performance.

    See also:

    Car Not Go
    The Cube's four-cylinder engine offers up modest power at best, and it emits a muffled roar when pushed hard. There's little fun to be had at higher revs, which might have sufficed a decade ago. T ...

    Supplemental air bag warning light
    The supplemental air bag warning light, displaying in the instrument panel, monitors the circuits for the air bag systems, pretensioners and all related wiring. When the ignition is placed in t ...

    Trunk light
    The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light will go off after about 30 minutes if the trunk lid is left open, unless the ignitio ...