SOURCE select switch
With the ignition switch turned to the ACC or ON position, push the SOURCE select switch to turn the audio system on. Push the switch to change the mode in the sequence of AM, FM, SAT, CD, iPod®, USB and AUX.
If no CD is located or an AUX, iPod® or USB memory are not connected, the CD, AUX, iPod® or USB memory modes will be skipped.
See also:
Explanation of general maintenance items
Additional information on the following
items with * is found later in this section.
Outside the vehicle
The maintenance items listed here should be
performed from time to time, unless otherwise ...
Wheel balance
Unbalanced wheels may affect vehicle handling
and tire life. Even with regular use, wheels can
get out of balance. Therefore, they should be
balanced as required.
Wheel balance service should b ...
FM/AM/SAT radio operation
FM/AM band select:
Pressing the FM·AM button will change the band
as follows:
AM > FM1 > FM2 > AM
When the FM·AM button is pressed while the
ignition switch is in the ACC or ON position, the ...
