Braking precautions

The brake system has two separate hydraulic circuits. If one circuit malfunctions, you will still have braking at two wheels.

You may feel a small click and hear a sound when the brake pedal is fully depressed slowly.

This is not a malfunction and indicates that the brake assist mechanism is operating properly.

See also:

Headlight beam select
1 To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. 2 Pull the lever back to select the low beam. 3 Pulling and releasing the lev ...

Manual Transmission (if so equipped)
● Always tow with the manual transmission in Neutral. ● After towing 500 miles (805 km), start and idle the engine with the transmission in Neutral for two minutes. Failure to idle the ...

Clearing the programmed information
Individual buttons cannot be cleared. However, to clear all programming, press and hold the two outside buttons and release when the indicator light begins to flash (approximately 20 seconds). ...