See also:

Installing front license plate
Use the following steps to mount the front license plate: (1) Make holes on the plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. Apply light pressure to the ...

Operating tips
- The screen displayed on the Around View Monitor will automatically return to the previous screen when no operation takes place for 3 minutes after the CAMERA button has been pushed while the ...

Hood
(1) Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly.  (2)- Push the lever at the front of the hood to the side as illu ...